Stainless Steel Strapping
Item #
Y3534

Note:

Stainless Steel 304

Stainless Steel Strapping

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$124.90

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 800‑274‑5271 or email us.

Product Information

Details

Stainless Steel Strapping

Stainless steel strapping is ideal for installing signs on large diameter posts and poles when standard sign mounting brackets won't work.

The most common uses for stainless steel strapping are for securing wing type brackets for street name signs, as well as mounting regulatory and warning traffic signs on poles. These rolls of 3/4" x .030” x 100 ft. long stainless steel strapping come in a plastic tote that keeps the strapping organized and allows it to be portable.

  • Flared leg bracket with 3/4″ S.S. strapping
    Flared leg bracket
    with ¾" S.S. strapping
  • Straight leg bracket with 3/4″ S.S. strapping
    Straight leg bracket
    with ¾" S.S. strapping
  • Side view of a mounted sign using S.S. strapping
    Side view of a mounted sign
    using S.S. strapping
  • Front view of a mounted sign using S.S. strapping
    Front view of a mounted sign
    using S.S. strapping

Tools required for installation:

Installation steps:

  1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  2. Insert one end of the strapping into your straight or flared leg sign mounting bracket.
  3. Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  4. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
  8. Repeat these steps to install the second band of strapping.
  9. At last, proceed to install the sign onto the brackets, using the hardware provided (1 hex head bolt and 1 washer each).
  • Strapping being inserted into the buckle
    Strapping being inserted into the buckle
  • Strapping being inserted into wing seal
    Strapping being inserted into wing seal
  • The other end of the strapping being inserted and bent to hold it in place
    The other end of the strapping being inserted
    and bent to hold it in place
  • Strapping tool Y3532 tightening the strapping around the pole
    Strapping tool Y3532 tightening the strapping
    around the pole
  • Strapping tool Y3533 tightening the strapping around the pole
    Same process with a different tool Y3533
    tightening the strapping around the pole
  • Using either the Spinner or Ratchet tool cut the excess strapping
    Using either the Spinner or Ratchet tool cut
    the excess strapping
  • Extra strapping left over to be sealed under buckle or wing seal
    Extra strapping left over to be sealed under
    buckle or wing seal
  • Bend the strapping over the buckle or wing seal to partially secure the strapping
    Bend the strapping over the buckle or wing
    seal to partially secure the strapping
  • Wing seal or buckle being closed to secure the strapping
    Wing seal or buckle being closed to secure
    the strapping
  • mounted sign bracket
    Photo of mounted sign bracket
  • Sign installation process using stainless strapping
    Sign installation process
  • mounted sign using strapping
    Photo of a mounted sign

Reviews

800‑274‑5271
Cart

Your cart is empty.